Deluxe Gouge Set

Deluxe Gouge Set Review

See more picture @ amazon.com

Deluxe Gouge Set Feature

• Contains 14 tools
• Includes roughing gouge set and detail gouge set

If you own a reciprocating power carver and are frustrated with the lack of available cutting blade profiles - read on! Flexcut has developed a new line of quality blades for reciprocating power carvers in the sizes and profiles you need most. The same low resistance cutting edge that Flexcut is known for now allows your Ryobi, Proxxon, or Automach carver to work less and carve more. Detail Gouge Set contains a 3/8" No. 3, 5/16" No. 5, and 1/8" No. 11 gouge, and a 1/4" 70 degrees V-parting tool. Roughing Gouge Set contains a 5/8" No. 3, 9/16" No. 5, 3/8" No. 8 gouge, and a 3/8" 70 degrees V-parting tool. Deluxe Gouge Set contains tools listed above plus 11/16" 90 v-parting, 1/2" No. 8 gouge, 3/4" No 3 gouge, 5/8" No 5 gouge, 1" No 3 gouge, and 7/8" No 5 gouge.

Work Sharp WS3000 Wood Tool Sharpener

Work Sharp WS3000 Wood Tool Sharpener Review

See more picture @ amazon.com

Work Sharp WS3000 Wood Tool Sharpener Feature

• Complete air-cooled, dry sharpening system for chisels, plane irons, spoke shaves, carving tools, and lathe tools
• No jigs required--sharpening port has precise and repeatable bevel angle settings of 20°, 25°, 30°, and 35°
• Powerful 1/5-hp motor with 580 RPM speed has routed air flow and heat-sink cooling system
• 2-year warranty only valid for North American 110V power source applications
• Use of power converters for 220V not recommended

The Work Sharp WS3000 Wood Tool Sharpener is an easy-to-use dry sharpening system for chisels, plane irons, lathe tools, carving tools, and other woodworking tools. Designed for the serious woodworker, this sharpening system is packed with unique features that make it easy to achieve consistent angles on flat blades and contoured tools.

The Work Sharp WS3000 Wood Tool Sharpener provides: A port for sharpening blades up to 2-inches A tool rest for sharpening larger blades on top of the wheel An edge-vision wheel for sharpening curved and specialty tools

Before and after shots show the way Work Sharp renews dull, rusty tools. View larger.

Tools with larger blades can be safely sharpened on top of the wheel. View larger.

Edge-Vision lets you look through the wheel and see the surface you are sharpening. View larger.

Everything you need is included. View larger.

Sharp Blades Mean Better Results
Sharp tools mean you can cut through tougher materials and create more precise details. They reduce the amount of strain work puts on your body and make you much less likely to damage your work surface or hurt yourself. But stopping to sharpen tools interrupts the flow of work, and with some systems it's quite difficult.

With the Work Sharp WS3000 Wood Tool Sharpener, you can sharpen blades quickly, consistently, and easily without making a mess or delaying a project.

Quick, Consistent Sharpening
Precision tools like small chisels are extra tricky to sharpen freehand on large, rough wheels. That's why the sharpening port on the WS3000 is so innovative. This port, which handles blades from 1/8 inch to 2 inches, makes it incredibly easy to sharpen the bevel on small tools from underneath the wheel.

Angles of 20, 25, 30, and 35 degrees are set in the machine, so you don't need an extra jig or a special tool to ensure that you are creating a bevel edge with a consistent, effective angle. You can also achieve a perfect five-degree micro-bevel for fast re-honing.

An adjustable fence in the port keeps the tool square during sharpening, and when you pull the tool back out of the port, a ceramic oxide lapping abrasive automatically removes the burr on the back of the tool for a clean finish and a sharp cutting edge.

Convenient Sharpening Options
When you are working with bigger tools, a conveniently placed tool rest makes it easy to hold larger blades in place as you sharpen them freehand on the top of the wheel. Also available is a wide blade attachment that enables you to sharpen and hone blades up to three inches wide with the Work Sharp 3000 (not included).

And when it comes time to sharpen contoured tools, you can slip an innovative slotted Edge-Vision wheel onto the WS3000. This lets you look through the wheel to see the edge of the tool you are sharpening from below, taking the guesswork out of maintaining lathe tools and other curved or v-shaped blades.

Durable Glass Wheels Provide Consistency
In addition to the Edge-Vision wheel, this sharpener comes with two tempered glass wheels. The big advantage of tempered glass is that it maintains its flatness and won't wear down like a traditional grinding wheel.

You can attach a wide variety of standard six-inch, adhesive-backed abrasive disks to these wheels, making it easy to select the grit you need for rough grinding or fine honing. And with two disks, you can always have four different grits ready to go (one on each wheel surface), making it easy to move from task to task.

Click to view more features of the WS3000.

Reliable, Mess-Free Dry Operation
In order to avoid the hassle and mess of expensive wet sharpening systems, this dry system uses routed airflow from the motor and a special heat-sink design to keep your tools from overheating. This means you don't have to worry about damaging the edge you just created or ruining the temper of steel tools.

To make all this possible, Work Sharp uses a quiet 1/5-HP motor that produces a high torque max wheel speed of 580 rpm. This low-rpm wheel maintains speed regardless of load for improved consistency, so whether your specialty is custom furniture, cabinetry, or old-fashioned wooden toys, you can rely on the WS3000 to keep your tools sharp and ready for use.

This award-winning Work Sharp tool is backed by a full two-year warranty.

What's in the Box
Wood tool sharpener, two glass wheels, one slotted Edge-Vision wheel, a crepe stick (for cleaning abrasives), an instructional DVD, and 16 abrasives: 11 solid abrasives and 5 slotted abrasives with grits ranging from P80 to 3600 Micro-Mesh

Ci3 Mini Finisher Replacement Carbide Cutter

Ci3 Mini Finisher Replacement Carbide Cutter Review

See more picture @ amazon.com

Ci3 Mini Finisher Replacement Carbide Cutter Feature

• Ci3 Mini Finisher Replacement Carbide Cutter
• Ideal for roughing, finishing and detail work

Ci3 Mini Finisher Replacement Carbide Cutter

SpringTools 32R42-1 Combination 2/32-Inch Nail Starter & Nail Setter

SpringTools 32R42-1 Combination 2/32-Inch Nail Starter & Nail Setter Review

See more picture @ amazon.com

SpringTools 32R42-1 Combination 2/32-Inch Nail Starter & Nail Setter Feature

• Set Any Finish Nail Or Brad. Nail Set Is Ideal in Repairing Brads From Pnumatic Nailers That Mis-Fire And Don't Go All The Way Into The Wood Surface.
• Drive Nails Into Any Wood Surface Without A Hammer. Perfect For Tight Spots And For Driving Small Finish Nails Without Hitting Fingers With A Hammer
• This Tool Is Compact And Light Weight About The Size Of A Pen So It Will Easily Fit In Shirt Pocket.
• Never Hit Your Fingers With A Hammer Again!
• All SpringTools Impact Tools Are Made In The USA And Are Guaranteed For Life.

Spring impact tool. The nail starter easily starts and guides nails into wood surfaces. The nail set tip sets finish nails in trim and other wood surfaces.

Sorby Thin Kerf Parting Tool

Sorby Thin Kerf Parting Tool Review

See more picture @ amazon.com

Sorby Thin Kerf Parting Tool Feature

• 10-1/2'' long.
• Blade extends 4-1/2'' from handle.
• 6'' riveted Ash handle.

Designed to give the cleanest cuts with a minimum of waste, this Thin Kerf Parting Tool features a 1-1/4" blade width that eliminates the flexing and twisting associated with thin blades. The double-bevel HSS cutting face imparts fine parting lines to turnings. For a solid interface with the handle, the blade is seated and riveted a full 4-1/4" into the handle.

Work Sharp 3000 Wide Blade Attachment

Work Sharp 3000 Wide Blade Attachment Review

See more picture @ amazon.com

Work Sharp 3000 Wide Blade Attachment Feature

• All tools and hardware for installation are also included.
• Sharpens flat blades up to 3-inches wide to these angles: 15, 20, 25, 30, 35, 40, 45, 50, 60-degree
• Top table is a precision machined metal casting for optimum flatness and rigidity.
• Honing guide is cast metal with innovative side clamping design to ensure precision blade alignment and sharpening
• Blade Alignment Fixture and bevel angle gauge are included.

Use this Work Sharp 3000 wide blade attachment to grind, sharpen, and hone most plane or chisel blades up to 3" wide. It works with the 3000s glass plate and utilizes the entire abrasive surface, which you cant do using the chisel port. The attachment has three main components; a plate which attaches to the back of the 3000, a guide which holds the blade and rides on the plate, and a bevel setter. Its easy to set up and use.

FastCap Third Hand Magnetic Door Clip, 4-Pack

FastCap Third Hand Magnetic Door Clip, 4-Pack Review

See more picture @ amazon.com

FastCap Third Hand Magnetic Door Clip, 4-Pack Feature

• DoorMags easily create in and out access through any dust barrier wall
• Use high performance neodymium magnets which keep plastic tight to poles
• Eliminates the need to buy expensive single use self-adhesive zippers
• Lasts a lifetime

The DoorMag eliminates the need to buy expensive single use selfadhesive zippers. Our DoorMags easily create in and out access through any dust barrier wall. They utilize high performance neodymium magnets, which keep plastic tight to poles and will last a lifetime.

Crown 116 9-Inch Bevel, Rosewood

Crown 116 9-Inch Bevel, Rosewood Review

See more picture @ amazon.com

Crown 116 9-Inch Bevel, Rosewood Feature

• Exceptional quality tools from Crown Hand Tools Ltd, Sheffield, England
• Use with dovetails and framing
• Use to transfer corner angles to shelves

Quality 9-Inch Bevel with rosewood handle is made with hardened, tempered, and blued steel blade. Fitted with brass, this tool is an accurate, attractive, traditional Sheffield product. Use with dovetails and framing - anywhere there are odd angles.Exceptional quality tools from Crown Hand Tools Ltd, Sheffield, EnglandUse with dovetails and framingUse to transfer corner angles to shelves

Kreg NZ03-B Drawer Mounting Brackets

Kreg NZ03-B Drawer Mounting Brackets Review

See more picture @ amazon.com

Kreg NZ03-B Drawer Mounting Brackets Feature

• Helps align cabinet drawer boxes to slides
• Can be used with framed and frameless cabinets
• Fast and simple operation process
• Pull the slide to the front of the drawer box and secure it into position by driving a screw

Kreg Drawer Mounting Brackets help align drawer box to cabinet slides for both framed and frameless cabinets. Just clamp a bracket under each slide, set the drawer box into the drawer opening so it balances on the brackets, pull the slide to the front of the drawer box, and secure it into position by driving a screw. For both face frame and faceless cabinets, aligning the drawer box to full extension slides is simple with our drawer mounting brackets. Simply clamp a bracket under each slide, set the drawer box into the drawer opening so it balances on the brackets, then pull the slide to the front of the box and drive your screws. The 12'' brackets work with most common drawer sizes, and the 1/8'' tabs on the front of the bracket are designed to fit under mounted full extension slides for perfect placement every time. Made of rugged, shock resistant plastic for years of service, these brackets are a great addition to your workshop and toolbox.

Kreg K4MS Jig Master System

Kreg K4MS Jig Master System Review

See more picture @ amazon.com

Kreg K4MS Jig Master System Feature

• Removable drill guide for use with bench top and portable bases
• Patented 3-hole drill guide allows you to make perfectly placed pocket-holes in a wide variety of material widths and thicknesses
• 1/8-inch incremental settings for materials from 1/2-inch to 1-1/2-inch thick
• Dust collection shroud helps reduce wood chips
• Large clamping recess allows for many different styles of clamps to secure the jig to the workbench

Featuring a removable drill guide for use with benchtop and portable bases, the Kreg Jig Master System is the ultimate pocket-hole jig, and a great choice for any woodworking enthusiast. For precision and accuracy, it offers 1/8-inch incremental settings for materials 1/2-inch to 1-1/2-inch thick and patented three drill guide fixed spacing on the drill guide. A dust collection shroud means no more woodchips, and the clamping recess allows you to use many different styles of clamps to secure your jig to the workbench. For peace of mind, the hardened steel drill guides are backed by a lifetime warranty.

Jig Master System At a Glance: Removable drill guide for use with benchtop and portable bases 1/8-inch incremental settings for materials from 1/2-inch to 1-1/2-inch thick Rear-mounted clamp design--rigidity and strength to keep workpiece in place Comes with portable base, SkillBuilder DVD, carrying case, and more Hardened steel guides with lifetime warranty

Sturdy benchtop jig utilizing the benchtop base for high-speed production Pocket-Holes.

Contractor-grade jig for work on the road with the portable base.

Three Tools in One
Thanks to its innovative Removable Drill Guide, the Kreg Jig Master System can be many tools at once. First, a sturdy benchtop jig utilizing the benchtop base for high-speed production pocket-holes, second as a contractor-grade jig for work on the road through use of the portable base, and finally as a high quality repair jig with the addition of spacer blocks to the bottom of the drill guide.

Serious Woodworking Tool with High-Quality Features
Between its solid clamp, large clamping recess, dust-collection attachment, material support stop, removable three-hole drill guide, and seemingly endless adjustability, this jig has it all. If you're serious about owning the highest quality tools, look no further than the Kreg Jig Master System.

Sturdy Toggle-Clamp
The Kreg Jig Master System features the same reliable rear-mounted clamp design featured on the very first Kreg jig. It's a proven design offering incredible rigidity and uncompromising workpiece hold-strength. Adjustments are as easy as releasing the lock-nut, and rotating to the correct setting.

In addition, the large clamping recess makes it easy to secure the jig to the workbench using Kreg's multi-purpose face clamps or any common bar clamp or c-clamp.

Removable 3-hole drill guide.

Three-Hole Drill Guide with Steel Core
The patented three-hole drill guide lets you make perfectly placed pocket-holes in a wide variety of material widths and thicknesses. Every Kreg drill guide features a hardened steel core that carries a full lifetime guarantee. The core shrouds the bit and supports the workpiece through 100% of the drill-stroke, resulting in minimal bit deflection, reduced tear-out, and a clean pluggable pocket-hole.

Durable Construction and Optimized Drilling Angle
The blue body of the every Kreg jig is made from a heavy-duty glass-reinforced nylon, a unique composite material that offers the resiliency and flexibility you need without sacrificing strength and durability. To increase driving efficiency and minimize the overall size of the pocket-hole to less than 1-1/2 inches, this system also features an optimized drilling angle.

Wood-Chip Relief Hole Extends Bit Life
The Kreg Jig Master System includes one wood-chip relief hole for every drill guide hole, designed to keep the drill bit clear of excess wood chips, minimize drill torque, increase the longevity of your drill bits, and allow you to complete a perfect pocket-hole in one plunge instead of three.

What's in the Box
Kreg Jig Master System, face clamp, portable base, drill guide spacer, material support stop, dust collection attachment, 3/8-inch stepped drill bit, six-inch square driver, three-inch square driver, starter screw set, starter plug set, quick-start guide, SkillBuilder DVD, and carrying case.

All in One Clamp U-54 54-Inch Ultra Wide Grip Clamp with Double T-Track

All in One Clamp U-54 54-Inch Ultra Wide Grip Clamp with Double T-Track Review

See more picture @ amazon.com

All in One Clamp U-54 54-Inch Ultra Wide Grip Clamp with Double T-Track Feature

• No more C-clamping with a self-clamping straight edge to guide your power tools for truly straight cuts
• Aluminum extrusion is extra wide for rigidity over the 54 inch length
• Raised T-tracks accept A, Twin, and Ultra series Saw Plate, Router Plate and Stop Block but will not work with Contractor series accessories
• Nylon jaws hold work piece securely and are predrilled for accessory Wide Jaws and Tall Jaws
• Make cross cuts on 4 foot by 8 foot stock

The E. Emerson Tool Company U-54 All-in-One 54-Inch Ultra Wide Grip Clamp adds extra width for superior rigidity and two T-tracks for attaching a wide range of accessories, including stops, router plates, and saw plates. Wide aluminum jaws protect soft surfaces from wear, and the jaw holes allow you to insert tall jaws, wide jaws, and story sticks. It's especially good for 4-foot sheets, and it's the most durable, most robust clamp you can buy.

Micro Jig ZeroPlay Guide Bar System (2 Bars + 2 Stops)

Micro Jig ZeroPlay Guide Bar System (2 Bars + 2 Stops) Review

See more picture @ amazon.com

Micro Jig ZeroPlay Guide Bar System (2 Bars + 2 Stops) Feature

• ZeroPlay Guide Bar System
• Guide bars are easily calibrated
• Includes two guide bars, two ZeroPlay stops
• Assembly hardware included

Each guide bar is composed of two interlocking plastic bars that adjust laterally to the exact width of your miter slot to stabilize your jigs. Guide bars are easily calibrated from the top of jigs and fixtures and are easy to retrofit. Includes two guide bars, two ZeroPlay stops and assembly hardware as well as plans to build a table saw cross cutting jig with off cut deflector, jointing fence alignment jig for the router table, and hold-down clamps made from scrap materials.

Shop Fox D2822 Wheel Marking Gauge

Shop Fox D2822 Wheel Marking Gauge Review

See more picture @ amazon.com

Shop Fox D2822 Wheel Marking Gauge Feature

• Brass head with 8" steel rod
• Hardened bevel edge marking wheel
• Simple and firm adustment with knurled knob
• Marks clean visible lines for precision layout

This simple, yet effective Marking Gauge has a single bevel edge wheel that scribes a fine line without tearing the wood fibers and does not wander with the woods grain. Precision ground brass shoe glides against the edge of the workpiece and the knurled brass knob makes adjustments quick and easy.